-High sensitivity gamma probe  for wired connection to AR 500, AR600, l200, P200, radiation monitoring and survey instruments
-NaI)Tl_ scintillator -1.5” and 2” crystal size available
-Cat5 cable interconnect between probe and detector
-Detector calibration and configuration stored in the detector eliminates the need to match detector and meter
 

SC series probes to AR, and L-series RIOS smart probe instruments.
-Compatible with PMseries with SM-SC adapter. Integrated HV supply and amplifier electronics -integrated calibration and configuration memory
-Standard Low Voltage Cat5 cabling to the meter body
-compatible with long cable runs (100ft)
 

- Lightweight, rugged & water resistant
- Ultra stable digital display with fast response
- Programmable detachable probes (1/4 turn circular connector)
- Simple 2 button user interface
- Programmable dose rate, accumulated dose and time audio alarms
- Uses standard “AA” batteries
- Over ten million hours of field experience in industrial environments
-This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Programmable detachable probes
- Ultra stable digital display with fast response
- Simple 2 button interface
- Probes interface using low voltage standard RJ-45 connection
- Remote probe operation up to 500’
- Programmable dose rate, accumulated dose and time audio alarms
- Interface to marquee display
- Plug and Go Uses standard “C” batteries
-This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Suitable for stand alone or large area fixed gamma monitoring network
- Programmable Dose Rate, Accumulated Dose, and Time Alarms
- Standard Alpha, Beta, Gamma, Neutron, tritium smart probe detectors available
- Connection For Remote SC/SM Type Probes
- Large & Bright ‘Go-No Go’ LEDs
- High Decibel Audio Alarm
- NO/NC Relay Alarm Contacts
- Interfaces to Marquee Display for at distant dose rate and alarm display
- 115VAC or 12VDC Operation
- RS-232 Output and Proprietary network connection
- local or remote detector connection
- probe can be calibrated independent of meter
-This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Suitable for stand alone of large area fixed gamma monitoring network
- Large & bright high visibility multi colour LED display
- Programmable dose rate, accumulated dose, and time alarms
- High decibel audio alarm
- Connection for remote SC/SM type probes
- Standard Alpha, Beta, Gamma, Neutron, tritium smart probe detectors available
- Internal battery for portable use
- Built-in AC power supply and battery charger
- RS-232 output and Proprietary network connection
- local or remote detector connection
- probe can be calibrated independent of meter
-This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Built-in energy compensated GM detector
- external detector connection available
- Programmable dose rate, accumulated dose, and time alarms
- Connection for additional remote SC/SM type probes
- Standard Alpha, Beta, Gamma, Neutron, tritium smart probe detectors available
- Bright LED ‘Safe’ and ‘Alarm’ indicator
- High intensity strobe activated when in alarm state
- 120 dB audio alarm
- NO/NC Relay alarm contacts
- Can be connected to remote high visibility scrolling marquee display
- Internal battery for portable use
- Built-in AC power supply and battery charger
- Available wall mounting bracket
- RS-232 output and Proprietary network connection
-This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Continuous regenerative dryer for tritium sampling
- Measures tritium and other radiation (probe dependant - gamma standard)
- various detector options including airborne particulate and Neutron
- Programmable dose rate, accumulated dose and time audio alarms
- Scrolling marquee displays measurements and alarm states
- User settable operating modes including elaped time. dose rate and integrated dose all with available alarm set points
- High dB audio and flashing strobe alarm
- RF link for remote communication of field and alarm states
-This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Multi-colour large and bright LED scrolling display
- Connects to all P200/L200 based meters
- Colours change to indicate alarm states
- Can be programmed to display text messages
- Designed for wall mounting
- Tripod mount available

- Portable, contact-free interface used to configure P200 meter
- LED to indicate data transmission
- required for P calibration and administrator setup

- General Purpose low to high range beta probe
- Energy compensated, dose equivalent solid state detector
- Removable polyethylene beta shield for gamma only background measurements
- Uses SmartProbeTM technology: probe contains calibration and user functions
- interfaces with most  of Bot Engineerings meter products

- General purpose mid to high range gamma probe
- Energy compensated, Dose equivalent Geiger Muller type detector
- Uses SmartProbeTM technology: probe contains calibration and user functions
- interfaces with most  of Bot Engineerings meter products

- General purpose high range gamma probe
- Energy compensated - Dose equivalent Geiger Muller type detector
- Water-resistant 1/4 turn circular connector
- Uses SmartProbeTM technology: probes contain calibration and user functions
- interfaces with most  of Bot Engineerings meter products

- Specialized high range energy compensated gamma probe used to make
measurements in pipes, small spaces and apertures
- Energy compensated, Dose equivalent Geiger Muller type detector
- Stainless steel construction (window is anodized aluminum)
- Water-resistant 1/4 turn circular connector
- Uses SmartProbeTM technology: calibration and user functions contained in probe
- interfaces with most  of Bot Engineerings meter products

- General purpose low range gamma probe
- Energy compensated, Dose equivalent Geiger Muller type detector
- Water-resistant 1/4 turn circular connector
- Uses SmartProbeTM technology: probe contains calibration and user functions
- interfaces with most  of Bot Engineerings meter products

- General purpose low to medium range gamma probe
- Energy compensated, Dose equivalent Geiger Muller type detector
- Water-resistant 1/4 turn circular connector
- Uses SmartProbeTM technology: probe contains calibration and user functions
- interfaces with most  of Bot Engineerings meter products

- General purpose low to medium range gamma probe
- Energy compensated, Dose equivalent Geiger Muller type detector
- Water-resistant 1/4 turn circular connector
- Uses SmartProbeTM technology: probe contains calibration and user functions
- interfaces with most  of Bot Engineerings meter products

- Gas proportional counter using P10 gas for detection of alpha, beta & gamma
- Designed for field analysis of swipe samples
- Uses SmartProbeTM technology: counter holds calibration and user functions
- interfaces with most  of Bot Engineerings meter products
- Remote connections up to 500’

- High Sensitivity Gamma Probe
- 2” NaI (Ti) detector integrated with Photo-multiplier tube
- Uses SmartProbeTM technology: probe contains calibration and user functions
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Can be operated as a remote connection up to 500’

- Alpha/Beta/Gamma probe for frisking and decontamination work
- Pancake type mica GM Tube
- Uses SmartProbeTM technology: probe contains calibration and user functions
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Can be operated as a remote connection up to 500’
- This equipment is compatible will all Bot Engineering SM and SC smart detector types. All in one, smart probes types include Neutron, Gamma, Beta and Alpha detectors each of which can be connected without reconfiguring the meter main meter body for plug and go capability.  Refer to the probes section of the mobile and portable equipment product category for probe options. Custom detectors are also available.

- Alpha/Beta/Gamma probe for frisking and decontamination work
- Pancake type Titanium window GM Tube
- Uses low voltage RJ-45 phone type connector
- Can be operated as a connection can be up to 500’ from meter
- SmartProbeTM technology: probe contains calibration and user functions

- General-purpose low to medium range gamma probe
- Energy dependant - Dose equivalent Geiger Muller type detector
- Uses SmartProbeTM technology: probe contains calibration and user functions
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Can be operated as a remote connection up to 500’

- Traditional ZnS Alpha detector
- Uses ZnS (Ag) deposited on plastic substrate with photo-multiplier tube
- Uses SmartProbeTM technology: probe contains calibration and user functions
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Can be operated as a remote connection up to 500’

- Very high sensitivity gamma probe
- 3” NaI (Ti) detector integrated with the photo-multiplier tube
- Uses SmartProbeTM technology: probe contains calibration and user functions
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Can be operated as a remote connection up to 500’

- Very high sensitivity gamma probe
- 3” NaI (Ti) detector integrated with photo-multiplier tube
- Uses SmartProbeTM technology: probe contains calibration and user functions
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Remote connection up to 500’

- General-purpose neutron detector
- Uses Boron Tri-Flouride (BF3) proportional detector in polyethylene moderator
- Wall-mounted or portable hand-held applications
- Uses SmartProbeTM Technology: probe contains calibration and user functions
- L200 or P200 meter mounts to probe; meter sold separately
- RJ-45 SC-SmartProbeTM interface using standard Cat5 ethernet cable
- Can be operated as remote connection up to 500’

- L200 based rolling monitor using matrix of 12 separate GM detector tubes
- Low cost - easily replaceable detectors
- Detector adjustable height for varying surfaces
- Two fixed axle and one removable pivoting wheel for manueverability
- Optional display shows location of contamination along detector array

- Connects P200 meters to SC probes
- 1/4 turn circular connection connects to P200 meter end
- Connection to probe made using standard phone cable (straight or coiled)
- Connection can be up to 500’ (150m)

- Connects SM probes to SC type meters
- Interface connects to SM probe end
- Connection to meter made using standard cat5 network cable (straight or coiled)
- Connection to meter can be up to 500’ (150m)

- Telescopic extender for P200 meters to SM type probes
- Head meter mount can be angled for better access
- Lightweight fiberglass
- Two stage telescopic extender, three lengths available

- Fixed length extension for P200 meter
- Direct connection for SM type probes
- Three standard extension lengths available; specify when ordering

- Provides vibration unit that can be clipped to PPE
- Fits over the stock Siemens PAD
- Easily installed and removed
- Single ‘AAA’ battery operation
- No power switch required
- Light and compact

- Provides vibration unit that can be clipped to PPE
- Fits over the stock Siemens PAD
- Easily installed and removed
- Single ‘AAA’ battery operation
- No power switch required
- Light and compact

-High sensitivity scintillator probe for environmental level surveys
- Energy compensated, loaded plastic scintillator
- Water-resistant 1/4 turn circular connector

- Lightweight, rugged & water-resistant, Floats in water
- Ultra stable digital display with fast response
- Simple 2 button user interface
- Programmable dose rate, accumulated dose, and time audio alarms
- Uses standard “AA” batteries
- millions of unit hours of field experience in industrial environments
- Vibration on alarm
- Programmable calibration due lockout option

Cart Mounted high-reliability self-contained C14 in air sampler

Cart Mount high-reliability self-contained C-14 in the air as well as C-14 containing hydrocarbon integrated measurements
-automatic wear compensating dual pump system
-close loop controlled flow system high MTBF proven  by decades of operational experience
-dual channel trace level detection capability
-Also available in table top or wall mount versions
 

- High sensitivity scintillator probe for environmental level surveys
- Nai scintillator (uncompensated), loaded plastic scintillator
- Water-resistant 1/4 turn circular connector

- 200 cc/min standard flow rate (adjustable from 50to 300 cc/min)
- dual pumps with automatic fail-sale switchover
- automated or manual leak tests
- full-time flow and vacuum indications
- extremely high-reliability components (>150,000 hrs field-proven)
- utilizes new style bottle sealing design
- wall mount, cart mount, and tabletop  versions

-Mobile version of SMS-100 with out proportional flow control
-Onboard instrument air supply
-Shielding can be removed for transport and easily re-installed
-110 or 220V operation
- Real time analysis of emissions with data archiving
- High reliability and availability
- Variable flow rates 20 to 100 L/min
- Automated drift correction & verification of detector function
- Uses standard 2” filters and cartridges
- Redundant high reliability speed controlled sampling pumps
- Stack flow display with fixed and proportional sampling rates
- Redundant mass flow meters
- Automatic pump switchover
- Vacuum and flow rate displays
- Leak test functions
- Alarm annunciation for flow errors
- Flow and time totalizer display

- Open frame design to allow all service  from front of unit
- Variable flow rates 20 to 100 L/min
- Uses standard 2” filters and cartridges
- Dual High reliability speed controlled vane pumps
- Alarm annunciation for flow errors
- Hot wire anemometer type mass flow sensor with closed loop pump control
- Optional electronics package for real time monitoring of discharges

- Variable flow rates 40 to 120 L/min
- Uses standard 2” filters and cartridges
- Dual High reliability speed controlled vane pumps
- Alarm annunciation for flow errors
- Hot wire anemometer type mass flow sensor with closed loop pump control
- Optional electronics package for real time monitoring of discharges

-Specially modified for mobile use
-Full function real-time Alpha-iodine-noble gas stack sampler with the high-reliability pumping system. 
-failsafe P&I sampling with Integrated self test and energy calibration
-multi-year release storage database
-fully qualified software with significant multi-unit operational experience