Standardized design Alarming rate meter with Keep alive. high rate and check source control functions
-Standardized electrical design for critical I&C safety system functions
-Available in various form factors for new and legacy replacement installations
-high-reliability design, fully analyzed for system-level FMAE
-Available with additional alarm setpoints
-bright easily readable Log bar graph display
-peak reading display storage capability
-easily serviceable design
 

-Provides automatic stabilization of detector energy calibration
-Suitable for energy pulse-based detectors
-Provides stabilization for scintillation based detectors
-Monitors signal stream health and generates an alarm in the event of signal corruption
-Legacy Line drop in improved replacement of original Harshaw Na-22 stabilizer modules
-Fully characterized for use in safety systems
-Available as stand alone module on custom form factors or as an integrated detection system - see IC-CAM

-Complete drop-in replacement for legacy Harshaw style stabilized activity monitor system
-Legacy Line replacement using new components with enhanced performance and simplified calibration
-New Legacy line detector unit with enhanced design is available as a certified device
-Suitable for duct, piping, liquid effluent, accident discharge systems
-Licensed nuclear device detection assembly 

-Analog plug in modules perform signal processing function
-Add, subtract, multiply, divide, square root, high-level alarm, low-level alarm, window alarm function available
-Legacy Line design for rapid adaptation to user-specific form factors
-2 to 4 inputs per module
-various power supply options
-No digital components- entirely analog-based
-Contact Bot Engineering for additional details

-Dedicated Module corrects time non linearity that is inherent in self-powered detectors (SPD)
-Configurable for different detector types with correspondingly different non linearities
-Available in customer-specific form factors
-Single or multi-channel configurations available
-Optional voting functionality for small leak detection
-5 digit voltmeter display and multi-point diagnostic/calibration test points allow readout of each mathematical  function performed by unit
-Entirely analog
-No digital electronics

-Novel reactor power monitor and trip unit
-Provides independent gross reactor power monitoring via monitoring of primary coolant prompt gamma emission
-Simple design, function installation and operation 
-Used in research reactors and suitable for future SMR designs
-Connects with Bot Engineering high integrated dose tolerant detectors

- Portable NIM compliant 4 module Crate
- Typically used for portable diagnostics and startup tests
- +/- 12v, 24v, 6v 108W port supply
- High capacity power supply optional

-HI/LOW trip version of RMS-2NH ratemeter
-Based on RMS2NH platform
-Available in multiple form factors
-Fully qualified for safety system use
-Includes remote source activation/test button
-low trip set point monitors keep alive state of health detector signal

- Multi function module for reactor startup monitoring systems
- Doubling time display and trip set point alarm
- Rate monitoring and trip set point and alarm
- Detector Bias set point and out of specification alarm
- Physically keyed set point lockout for rate and doubling time trip
- Completely Analog , no computers or software used
- Multiple outputs available for trip, power level, doubling time

-High reliability SCA with digital counter timer for legacy system replacement/upgrade
-8 digit counter with 1sec, 10sec and integrate counting modes
- High reliability integrated SCA/counter module
- LLD, LLD/ULD and Window discriminator modes
- Supports both unipolar and bipolar pulse inputs
- Standard double-wide NIM bin, other physical variants available
- Member of the Bot Engineering Legacy Line of products
- Intended for both new and legacy replacement applications

REACTOR START-UP INSTRUMENTATION SYSTEM
- Complete turn key system
- Portable rolling cabinet
- Four complete independent Channels 
- High sensitivity neutron detectors- in core and Ex core
-On board recording and dedicated setup equipment
-Doubling time and realtime power adjustable trip levels
-keyed trip lockouts all procedural flexibility
-designed for low power initial startup and  reactor core physics validation

- Single & Dual channel units available
- High to Low or Low to High trip configurations
- Plug-in Modular design
- High reliability; qualified for 40 years life

-Allows multiple alarms to be monitored with an alarm contact
-Accepts relay contact alarms from up to 24 inputs in 1 or 2 groups
-Provides "OR" tied alarm contact output with pulse alarm annunciation
-provides 2 alarm contact copies for each input contact
-alarms can be split into 1 or 2 alarm groups
-Single cabinet design with customizable aggregators and repeater board- 1 per inout alarm contact
-visible alarm status 
-simple alarm bypass capability
-selectable self-contained power supply for dry contact bais

-High reliability Wide dynamic rage ion chamber amplifier and bias supply
-Available in several form factors
-compatible with Lined and unlined ion chambers
-remote and coal tested capability
-over and under level trip set points
-optional doubling time display and trip set point
-optional diagnostic and operational auto zero function
-utilizes highly stable electrometer type similar to Bot Engineering sub femtoamp -electrometers
-No computerized components
-Easy servicing
-Optional double active circuit isolation

-Amplifies low level current signals produced by self powered detector
-Field selectable input levels and gains
-Available as all in one module or as backplane mounted circuit board assemblies
-Typically used with trip test and dynamic signal compensator for complete channel system
-All in one amplifier, Dynamic signal compensator, trip test also available in several form factors

- Used as a test and level trip unit for self powered detectors
- Connects detector to amplifier to allow dynamic signal test and manual trip
- Includes optional modes and features that include:
- Input signal intercept and augmentation (current summing)
- Manual time dependant test ramp current signal 
- Level trip set point and contact outputs
- Digital display of input and output currents, trip level
- Various form factors available

- Averaging system for up to three flow meters
- 4-20mA output for flow and temperature
- Rejection of out of specification flow meter signals
- Alarm indication for failed flow meters
- Remote diagnostics of flow meters