Integrated Neutron/gamma detector for monitoring on power fueling reactor irradiated fuel discharge
-extremely high integrated dose survival capability
-Utilizes standard BOT ONECOAX connection for simple , reliable and flexible cabling infrastructure
-Twisted pair interface with suitable Adapter allows existing cabling to be used for retrofit applications
-Corrosion resistant RF shielded enclosure
-Very low power
- User friendly TCP/IP interface
- PCMCIA data storage
- Eight SCA channels
- Highly flexible
- Built in 12V Battery Backup
- PCMCIA data storage
- Eight SCA channels
- User friendly interface
- Highly flexible
- Standalone 12V operation
- Selectable fixed or auto-ranging nine decade electrometer
- 100 fA to 325 uA operation in three ranges
- Auto zeroing, high stability
- Built in adjustable High Voltage supply
- Automatic electrometer disconnect protection
- Low power consumption, 12 Volt @ 10mA
- RS-232 interface or Single low voltage coax interface
- High quality enclosure and connectors
- Low power consumption, 12 Volt @ 5ma
- High quality enclosure and connectors
- Low power consumption, 12 Volt @ 5ma
-Utilizes standard BOT ONECOAX connection for simple , reliable and flexible cabling infrastructure
-Twisted pair interface with suitable Adapter allows existing cabling to be used for retrofit applications
-Corrosion resistant RF shielded enclosure
-Very low power
- Built in adjustable High Voltage supply
- Low power consumption, 12 Volt @ 5mA
-Utilizes standard BOT ONECOAX connection for simple , reliable and flexible cabling infrastructure
-Twisted pair interface with suitable Adapter allows existing cabling to be used for retrofit applications
-Corrosion resistant RF shielded enclosure
-Very low power
- Built in pre-amp, shaping amp and cable driver
- Built in adjustable High Voltage supply
- Low power consumption, 12 Volt @ 6.5mA
-Utilizes standard BOT ONECOAX connection for simple , reliable and flexible cabling infrastructure
-Twisted pair interface with suitable Adapter allows existing cabling to be used for retrofit applications
-Corrosion resistant RF shielded enclosure
-Very low power
- BOT single coax interface/pre-amp for Geiger Mueller detectors
- Low voltage single wire design
- Adjustable gain
- Internal bias supply
- Rad hard design
- 12Volt @ 3 mA
- BOT single coax cable interface
- Extremely rugged
- High MTBF
- Excellent sensitivity, 1mRem/Hr 137Cs produces 1CPS
- Extremely high dynamic range, over 8 decades
- Exceeds multi megrard exposure survival
- Self contained compact modular assembly
- Redundant detectors for Neutrons and Gamma fields
- Single coax low voltage connection per detector
- Low power
- Quick hot-swap design
- Tamperproof enclosure
- Dual detector set (4 detectors total) twisted pair to coax cable conversion
- Low coupling losses
- Tamperproof enclosure
- Quick hot-swap design
- No separate power required
- Quad detector set (8 detectors total) twisted pair to coax cable conversion
- Low coupling losses
- Tamperproof enclosure
- Quick hot-swap design
- No separate power required
The RL-MCA-DSP-2 is a unique all in one, DSP based MCA which is designed to operate via Ethernet connections. The use of Ethernet allows arrays of MCA-s to be used using standard commercial Ethernet routers and hubs. With this configuration the size of the MCA network can be extended indefinitely and operated as a dispersed wide area network. These units are widely used in BOT automated data collection systems.
The NGAM is a widely used multi channel SCA data acquisition module developed for Nuclear Safeguards and is currently used by the IAEA. The NGAM is a seconf generation device that uses Ethernet interconnectivity instead of the ADAM VXI bus connection of the earlier generation. The NGAM can be used inter changeably with the ADAM , both of which can be used can be used wherever acquisition of radiation event data is required to be collected in either a solitary or multi-unit fashion. Systems can be assembled with multiple NGAM’s for collection of data from dozens of detectors.
The highly flexible NGAM system, can be quickly adapted to a wide variety of data acquisition tasks. A wide range of radiation hardened detectors have been developed allowing the system to monitor a full range of radiation events such as gamma, beta, neutron or alpha activities.
The NGAM, integrates and records count rates at a user specified interval from eight SCA channels. It also serves as an interface/power supply for eight detectors. The unit provides real time download of acquisition data, system configuration information and diagnostics data through a network connection. The NGAM is also designed to run autonomously without ethernet connection, storing data for up to three months on its removable USB flash sticks. The NGAM detector connection uses low voltage single coax cable connections (Bot ONE WIRE) facilitating easy installation and reducing cost.
The NGAM units can be integrated into a very large system using VIFM Collect computer, NGAM crate /power supply and software that are currently available. The software can support in excess of 90 detectors to be configured in a completely automatic radiation monitoring system with alarms, event logging, remote annunciation and fail-safe data collection.
-Same specification as IRD30 with added tamper-indicating authentication pulser
-Adds Motion annunciation and provides unique device fingerprint
-Fully contained within IRD 30 housing
-Bot Single Coax interface for simplified installation
-fully waterproof when connected to tubing (shown)
-same form factor and features as IRD30
-Proven performance to > 10 Megarad integrated dose
-10 CPS/milliRad per hour
-Routinely used for standoff monitoring of reactor core, both running and during shutdown
-Routinely used for spent fuel handling monitoring
-Tissue equivalent version available
-Viable and easy to use Ion chamber alternative. No special cable or housing required
-Tissue equivalent version available
The RM-VIFM-DS-1 allows the VIFM series of detectors to be used with standard 9-pin NIM legacy and other equipment specific preamplifier power supplies. The DS-1 accepts the standard 9-pin plug and converts the power supply to the single wire signal/power supply signal required by the VIFM series. The DS-1 provides a BNC output connector of the detector analog/digital signal.
Fully Universal Electronics Module
-Miniature all in one Nuclear detector electronics modules
-Includes high current (PMT) high voltage fully adjustable bias supply, selectable mode and gain preamplifier, Selectable mode and shaping time amplifier, fully adjustable Window/LLD/ULD discriminator
-Simultaneous Linear or digital outs
-Intended to replace one NIM crate full of equipment
-Selectable power/digital/analog outputs using standard lemo OneCOAX compatible
-All setting can be set accurately using rotary and DIP switches
-Very low power 12V input power requirements
-same form factor as other Bot RL detector interfaces
-Utilizes standard BOT ONECOAX connection for simple , reliable and flexible cabling infrastructure
-Twisted pair interface with suitable Adapter allows existing cabling to be used for retrofit applications
-Corrosion resistant RF shielded enclosure
-Very low power
The Precision Time Reference VXI version, is a high stability oven controlled, GPS augmented very high stability and accuracy time module that provides highly accurate TOD and precision time aligned reference pulses for unattended systems that requite accurate records of events. This module can also be used with the BOT Engineering covert satellite communications system to allow handshake free 2 way satellite communications using low visibility wide spectrum burst technology.
The Module is VXI addressable with standard SCPI commands for module control and readout.
-Stand alone neutron shift register/multiplicity module
-TCPIP and Web interface control/readout
-Built in detector bias supply
-50 ns standardized detector input
-1/2 NGAM foot print allows use of units in one NGAM slot
-Interlocking chassis allows simple dual unit configuration
-Chassis interlock compatible with RM-nion
-Commercialized and upgraded version of Los Alamos National Lab design
-Stand alone Ion chambers interface module
-TCPIP and Web interface control
-Built in Ion chamber bias supply
-Built in auto zero disconnect and remote control output
-1/2 NGAM foot print allows use of units in one NGAM slot
-Interlocking chassis allows simple dual unit configuration
-Chassis interlock compatible with RM-LSRM
-Commercialized and upgraded version of Los Alamos National Lab design
-latching 19" rack create for 8 NGAM array
-Easy NGAM installation and removal with spring loaded latch
-Controlled swing down design to allow quick access to rear of modules for cable connection
-Can be used with RM-NION Networked Ion chamber and RM-LSRM Networked Neutron shift register for multi instrument system in one crate.
-General-purpose dual power supply and battery charger
-Thermally compensated battery charger
-Dual independent 12V DC output, the Output voltage can be factory configured for 6 to 48V
-Convection cooled with fan-assist
-Dual variable-speed fan only activates if extra cooling required
-Dual computer rest outputs
-Two separate watchdog timers using serial or USB interface, computer reset generated if a timeout occurs
-Designed to power nuclear safeguards monitoring system but is also general purpose
-Design based on RM-VIFMPS with similarly high MTBF
-Provides all required VXI voltages
-Includes high capacity battery charger with battery temperature compensation
-High reliability , >4,000,000 hours demonstrated MTBF
-Convection cooled with Fan assist
-variable fan speed controlled by cooling requirements
-Designed for Bot Engineering VIFM and NGAM systems
-Bot Single Coax interface for simplified installation
-Proven performance to > 10 Megarad integrated dose
-1 CPS/milliRad per hour
-Very compact form factor
-Water proof
-Routinely used for spent fuel process monitoring where small diameter serpentine access ports are mandatory or pre-existing
-Miniature all in one Nuclear detector electronics module
-Includes high current (PMT) high voltage fully adjustable bias supply, selectable mode and gain preamplifier, Selectable mode and shaping time amplifier, fully adjustable Window/LLD/ULD discriminator
-Simultaneous Linear or digital outs
-Intended to replace one NIM crate full of equipment
-BOT standard Single coax interface or selectable power/digital/analog outputs
-All settings can be set accurately using rotary and DIP switches
-Very low power, 12V input power requirements or use of BOT One Coax connection system
-Same form factor as other Bot RL detector interfaces